Limited monthly intake for defense manufacturers

Managed IT and CMMC Readiness for Defense Manufacturers

The pause isn't a pass.

CMMC's third-party assessments are on hold. The questions from your prime, and the security requirements in your contracts, are not. OverDrive IT helps defense manufacturers know exactly where they stand, in plain English, before someone else asks.

Free to apply, and not binding. A 5-minute application of interest. Your free readiness kit right after you apply, and your results by email.

Why it's limited: the Blueprint is scoped and led by our CISO, so we only take as many manufacturers each month as we can do properly.

WHERE YOU ARE TODAY Checks I could back with evidence: ______ of 19 Shade one block for each check you mark Yes. The empty blocks are your gap. THE GAP 19 minus your count = ______ checks to close WHERE YOUR CONTRACTS EXPECT YOU TO BE 19 of 19 Every requirement that applies to you, with evidence you can hand over.

Start With the Free Kit. Go Further With the Blueprint.

Two ways to see the gap between where you are today and where your prime expects you to be. Both start with the same free application.

Free, after you apply

The CMMC Readiness Kit for Defense Manufacturers

Many manufacturers find out where they stand only when a prime asks. This kit shows you first: the desired state, where you are today, and the gap between them.

  • 19 checks, four parts. Compliance, cybersecurity, Microsoft 365 or Google Workspace security, and AI governance, all in one 14-page document.
  • The gap, check by check. Each one states what a prime or auditor expects, lets you mark where you stand today, and gives you a line to write down what is missing.
  • One Gap Map. Totals every gap in one place and suggests an order for closing them.
  • Built for defense work. The 110-requirement NIST SP 800-171 quick check, a 72-hour incident page, an AI acceptable-use starter, and a Flow-Down Decoder for your prime's clauses.

How you get it: the kit is only available after you apply. Complete the 5-minute application of interest (it is not binding) and you can download the kit as soon as you submit. Your readiness results are emailed to you.

Apply Now, Get the Free 14 Page Kit →
The next step

The 50-Day Defense Manufacturer Blueprint

Know your CMMC position before your prime asks. Delivered within 50 business days, led by our CISO.

One engagement with four parts: a NIST SP 800-171 and CMMC readiness audit, a comprehensive vulnerability test, a Microsoft 365 or Google Workspace security review, and an AI governance review. You get one plain-English report ranked by what matters first, plus a live walkthrough with Kyle Murbach, PhD, CISSP, and our team.

  • Know where you stand against the controls your contracts depend on.
  • See what an attacker would find through your people, perimeter, and internal network.
  • Understand what is safe and what is exposed in your cloud platform and your use of AI.
  • Own a ranked plan you can act on yourself, hand to a prime, or ask us to carry out.

The investment is one fixed amount, set by company size and confirmed in writing before work begins. The same four parts as the kit, tested and written up by our team.

We take a limited number of new defense manufacturers each month and review every application. Applying is an application of interest and is not binding. If there is a fit, we email you a link to book a call.

What Other Manufacturers Are Saying

Since we started working with OverDrive IT, we are able to get our IT issues fixed as soon as they happen. We are now all on the same page and have network consistency across the company. The level of service and bedside manner they provide is unmatched. They make it easy to understand what exactly they are doing and what needs to be done quickly and efficiently.

John ElzerOwner, Apex Plastics, Inc.

Our company uses an industry-specific software system and OverDrive has helped us become fully integrated within that system making it easier for us to work. They also set up our remote system which was a big need for us. One of the best parts about working with them is their transparency. I always know what they're doing for our company and I always receive exceptional value for their service.

Jeff HeisePresident/CEO, Jamar Packaging, Inc.
  • 99.8%client satisfaction
  • CIS-alignedsecurity standard
  • Near-zerovoluntary client turnover
  • 100%in-house, US-based support

The Blueprint is scoped and led by Kyle Murbach, PhD, CISSP, OverDrive's Chief Information Security Officer and a former DoD Development Specialist who has hands-on penetration testing and incident response experience.

OverDrive IT at a Glance

A managed IT and cybersecurity provider for defense manufacturers.

  • Since 2000supporting manufacturing companies
  • CISO-ledKyle Murbach, PhD, CISSP, leads our compliance work
  • CIS-alignedour own security program follows the CIS standard
  • 100% in-houseUS-based support

The Defense Manufacturer Blueprint: a 50-business-day review

  • Where you stand against NIST SP 800-171.
  • What an attacker would find through your people, perimeter, and internal network.
  • How safely your cloud email and file platform is set up.
  • How your team uses AI around controlled information.

We are equipped to bring clients to CMMC Level 2.

Your Prime's Paperwork Becomes Your Paperwork

Three things make defense manufacturing different from other manufacturing:

Requirements flow down

A prime contractor passes its Department of Defense security clauses to every subcontractor that touches the work. You inherit rules you never negotiated, and you answer to someone who answers to the government.

The information moves faster than the rules

Drawings, specifications, and purchase orders travel by email, shared drives, laptops, and now AI tools. Nobody decided where controlled information should live, so it ends up everywhere.

A pause isn't a pass

The pause covers who does the checking. It does not remove what contracts already ask you to protect, and primes keep sending security questionnaires.

Attackers also know that a stopped line costs money by the hour. IBM's 2026 X-Force Threat Intelligence Index ranked manufacturing the most-attacked industry for the fifth year in a row.

The Pause Isn't A Pass

As of November 2026.

What was paused

  • The phase that would require third-party CMMC Level 2 assessments. A class deviation issued September 3, 2026 directs contracting officers to remove third-party assessment requirements from contracts.

What was not

  • DFARS 252.204-7012: protect covered defense information to NIST SP 800-171, report cyber incidents within 72 hours, and flow the clause down to subcontractors.
  • The NIST SP 800-171 requirements themselves (Revision 2, 110 requirements).
  • A current self-assessment score in the Department's SPRS system for contracts that call for it.
  • The government's right to assess your systems.
  • Your prime's security questionnaires and flow-down clauses.

The short version: the pause changes who checks, not what you are expected to have.

One Team for the Office, the Plant Floor, and the Paperwork

  • Know where you stand. A control-by-control look at NIST SP 800-171 and the CMMC level that fits the information you actually handle.

  • See what an attacker sees. Phishing, external, and internal testing, authorized in writing first, with no destructive testing.

  • Lock down the cloud platform. Microsoft 365 or Google Workspace configured and reviewed so email and file sharing are not the weak point.

  • Put rules around AI. An acceptable-use policy and approved-tools list so drawings and specs do not end up in a public AI tool.

  • Everything else, done for you. Help desk, backup and recovery, network and cybersecurity, cloud, ERP support, and IT vendor management for the plant and the front office.

FCI, CUI, and the Level You Actually Need

Your prime's contract and clauses tell you which applies.

If you handle...It meansCMMC level it points to
FCI (federal contract information)Information provided by or generated for the government under a contract that is not meant for public releaseLevel 1: 15 basic safeguarding requirements, with an annual self-assessment
CUI (controlled unclassified information)Sensitive information the government designates for protection, such as many engineering drawings and technical specificationsLevel 2: the 110 requirements of NIST SP 800-171
Some of the most critical programsAdditional protections beyond Level 2Level 3, government-led

OverDrive IT is equipped to bring clients to CMMC Level 2. We do not issue CMMC certifications; those come from authorized third-party assessors when they are required.

How It Works

  1. Apply.

    A 5-minute application: three questions about your situation and ten about how ready you feel next to what you could show today.

  2. Get your kit and your results.

    Download the free kit as soon as you submit. Your readiness results arrive by email.

  3. If there is a fit, book a call and know where you stand.

    We email you a link to book. Within 50 business days we review, test, and report, then walk you through it. Single-site shops often finish sooner, and larger companies get a timeline after a scoping call. You decide what happens next.

Defense Manufacturing Questions

Last reviewed: November 2026

Do we need CMMC if we make parts for defense contractors?

If you store, process, or transmit federal contract information under a Department of Defense contract, CMMC Level 1 applies, which means 15 basic safeguarding requirements and an annual self-assessment. If you handle controlled unclassified information, Level 2 applies, which maps to the 110 requirements of NIST SP 800-171. Your prime's contract clauses tell you which one. OverDrive IT reviews your flow-down paperwork and tells you which level fits the information you actually touch.

CMMC is paused. Do we still need to do anything?

Yes. As of November 2026, DoD has paused the phase that would require third-party CMMC assessments, and a September 2026 class deviation directs contracting officers to remove those requirements from contracts. The security requirements in DFARS 252.204-7012, including NIST SP 800-171 and 72-hour incident reporting, still apply, and primes still send security questionnaires. The pause changes who checks, not what you are expected to have.

What is the difference between FCI and CUI?

Federal contract information (FCI) is information provided by or generated for the government under a contract that is not intended for public release. Controlled unclassified information (CUI) is sensitive information the government designates for protection, such as many engineering drawings and technical specifications. FCI points to CMMC Level 1 and CUI points to Level 2. OverDrive IT helps manufacturers work out which of their files fall in each group.

What is a SPRS score, and do we need one?

SPRS is the Department of Defense system where contractors post a score from their NIST SP 800-171 self-assessment. The score starts at 110 and drops by the weight of each requirement not yet met, so it can go negative. Contracts that call for a NIST SP 800-171 assessment ask for a current score, and a prime may ask to see yours before awarding you work. OverDrive IT shows you what score your evidence supports.

What does DFARS 252.204-7012 require?

DFARS 252.204-7012 requires contractors to protect covered defense information using NIST SP 800-171, report cyber incidents to the Department of Defense within 72 hours of discovery, preserve affected system images for at least 90 days after reporting, and flow the clause down to subcontractors that handle that information. Many small manufacturers have never written down how they would meet the 72-hour window. OverDrive IT helps build and test that plan.

What is a flow-down clause, and why is my prime sending them?

A flow-down clause is a contract requirement a prime must pass to the subcontractors that handle part of the work. Primes send them because the government holds the prime responsible for the supply chain. Your purchase orders may carry DFARS cybersecurity clauses, security questionnaires, or both. OverDrive IT reads them with you and explains what each clause asks you to prove and who at your company usually owns it.

Can OverDrive IT certify us for CMMC?

No. CMMC certifications, where they are required, come from authorized third-party assessors, not from the company preparing you. OverDrive IT is equipped to bring clients to CMMC Level 2, which means readiness: knowing your gaps, building the evidence, and being ready when an assessment applies. We keep that line clear so you never mistake our report for a certification.

How does AI fit in with controlled information?

Employees often paste drawings, specs, and emails into public AI tools without a second thought. If that information is controlled, it may have just left your boundary, and some vendors use inputs to train their models unless a setting says otherwise. OverDrive IT's AI governance review finds out what your team is using, and gives you an acceptable-use policy and an approved-tools list.

Is submitting an application binding?

No. The application is an application of interest. It does not commit you or OverDrive IT to anything. We use it to decide whether there is a fit, and we take a limited number of new defense manufacturers each month. If there is a fit, we email you a link to book a call, and you decide what happens next.

What is the CMMC Readiness Kit for Defense Manufacturers, and how do I get it?

The CMMC Readiness Kit for Defense Manufacturers is a free, 14-page document from OverDrive IT with 19 checks across compliance, cybersecurity, Microsoft 365 or Google Workspace security, and AI governance, plus a Flow-Down Decoder for the clauses your prime sends you. Each check states the desired state, lets you mark where you stand today, and records the gap, and a Gap Map totals your gaps and suggests an order for closing them. It is available after you apply for a Defense Manufacturer Blueprint slot: you complete a 5-minute application and can download the kit as soon as you submit. It is guidance for your own review, not a CMMC assessment.

What is the Defense Manufacturer Blueprint, and how long does it take?

The Defense Manufacturer Blueprint is OverDrive IT's 50-business-day review for defense manufacturers with up to 100 employees at up to two sites. Larger companies are scoped on a call. It combines a NIST SP 800-171 and CMMC readiness audit, a comprehensive vulnerability test, a Microsoft 365 or Google Workspace security review, and an AI governance review. You receive one plain-English report and a live walkthrough led by our CISO.

How much does the Blueprint cost?

The Blueprint is a paid engagement. The investment is one fixed amount, set by company size because size changes how much there is to review and test. It is confirmed in writing before any work begins. OverDrive IT does not publish a per-part price list.

Can we do this ourselves?

Yes. The free CMMC Readiness Kit is built for that. It shows the desired state, where you are today, and the gap between them, and most of it can be done in-house with admin access. If you would rather not carry the work, OverDrive IT can do it 100% for you. The Defense Manufacturer Blueprint covers the same four parts, tested and written up for you. Those are the two options: do it yourself, or 100% done for you.

Limited monthly intake for defense manufacturers

Could You Answer Your Prime's CMMC Questions Today?

Defense manufacturers: apply in 5 minutes. We email your readiness results and your free CMMC Readiness Kit.

We take a limited number of new defense manufacturers each month. Apply now to be in the next review.

Premium IT. Globally recognized compliance and security standards. Plain-English guidance.